Description
The MaxO2+A was designed with simplicity and portability in mind. This analyzer quickly adapts for use in tubing applications and is ideal for checking oxygen percent accuracy in line or on concentrators. Its patented ergonomic design fits comfortably in your hand and features a simple one-touch on/off and calibration. The MaxO2+A will calibrate to room air (20.9%) or 100% oxygen. For applications needing an external sensor, check out our MaxO2+AE.
- Features an integrated MAX-250+ long life sensors
- 5,000+ hours operation on 2 AA batteries
- Easy one-touch calibration
- Patented ergonomic design
- Quickly adapts to bore tube applications
- 24-month warranty on both the analyzer and sensor
| Measurement Range | 0 – 100% Oxygen |
| Display Resolution | 0.1% Oxygen |
| Warm-up Time | None Required |
| Operating Temperature Range | 15°C – 40°C (59°F – 104°F) |
| Operating Humidity Range | 0 – 95% RH non-condensing |
| Oxygen Measurement Accuracy | ±3% actual oxygen level over full operating temperature range |
| Sensor Connection | M16 x 1 Thread |
| Sensor Operating Life | >900,000 oxygen percet hours, minimum 2 years in typical applications |
| Maximum Storage Temperature Range | 15°C – 50°C (5°F – 122°F) |
| Optimal Storage Temperature Range | 5°C – 25°C (41°F – 77°F) |
| 90% Response Time | 15 seconds @ 23°C |
| Low-Battery Indicator | “BAT” icon displayed on LCD |
| Power Requirement | 2-AA Alkaline Batteries (2×1.5 Volts) |
| Calibration Reminder | One week timer started with every calibration , “CAL” icon displayed on LCD |
| Sensor Type | Maxtec MAX-250+ galvanic fuel cell |
| Total Weight | 0.4 lbs (170 grams) |
| Dimensions | 3.75” (tall) x 3.00” (wide) x 1.33” (thick) |
Max-250+ Maxtec Compatible Oxygen Sensor
Item # RES7001-SEN
This oxygen fuel cell is a drop-in replacement for the MaxO2+A.
